Frequently Asked Questions
Machines in use after a period of time, if there is a level, the reasons are:
The Soft Foundation
The soft foundation.Without cement concrete foundation can not bear the weight of the host itself, make host sinking, result in uneven.Need to consolidate foundation, cushion flat to the fuselage.
Glass Bracket Foot Has No Fixed
Glass bracket foot has no fixed.When grinding large glass is easy to produce displacement, has led to the difference of level.Need to correction stents.
Use The Machine For A Long Time Only Replace The Small Conveyor Chain Block Glue
Use the machine for a long time only replace the small conveyor chain block glue, the old and new square plastic use collocation, height difference, has led to the head size of grinding out of glass.Must replace all square glue or simply change the whole picture of conveyor chain.
Conveyor Chain Level Uneven
Conveyor chain level uneven.Into a head of conveyor chain and a glass a conveyor chain and front and back platen is not a straight line (horizontal).First tune into A glass of guide rail height (can guide at the bottom of the stroke by adjusting screw screw), make long glass edge grinding at 2500 from beginning to end on the guide of conveyor chain transmission over (in glass into the pressure plate after 40 cm watch two places: press the plate at the bottom of the glass and machines on the conveyor chain whether most the right side of the glass on the conveyor chain or on the conveyor chain above), if press the plate at the bottom of the glass on the conveyor chain conveyor chain and leave empty, would probably have to lower the A word on the shelf on the right side of the guide rail travel screw until smooth;If the machine is most the right side of the glass on the conveyor chain tail (empty) cock, you will need to increase A word on the right frame of the guide screw until smooth.
* Straight edge grinding machine is common problem of glass processing.